SHOP CONCRETE CARE SYSTEMS

Choose the product family that matches your project, then select the product and size you need. If you’re unsure where to start, use the TopKote Project Builder for a personalized recommendation.

Browse Product Systems

Project builder

Use the TopKote Project Builder to receive a personalized recommendation based on your project, surface condition, and square footage.

RE-NEW CONCRETE RESURFACING SYSTEM

Restores worn, weathered, and faded concrete with a durable spray-on resurfacing system.

Re-New is designed to restore the appearance of aging concrete without the cost and disruption of replacement. Choose the kit size that matches your project, then complete your purchase on the individual product page.

Ideal for smaller driveways, patios, sidewalks, and pool deck restoration projects.

The RN-400 Kit restores up to 400 square feet of worn exterior concrete with Re-New’s spray-on resurfacing system. Perfect for homeowners tackling smaller restoration projects with professional-quality results.

Available Sizes

Rn-400

Designed for larger residential and commercial concrete restoration projects.

The RN-800 Kit restores up to 800 square feet of worn exterior concrete using the same proven Re-New system while reducing the need for multiple kits on larger jobs.

Available Sizes

RN-800
  • Re-New Concrete Re-Surfacer 400 sq ft DIY concrete restoration kit

Re-New is a spray-on concrete resurfacing system designed to restore worn, weathered, and faded concrete without replacing it. Unlike paints and coatings that create a thick surface layer, Re-New bonds with the concrete to create a durable, natural-looking finish that helps renew appearance while maintaining the texture of the original surface.

The system is engineered for residential and commercial concrete including driveways, sidewalks, patios, pool decks, and other exterior concrete surfaces. Each kit contains the materials needed to apply two coats for long-lasting, professional-quality results.

Choose the kit size that best matches your project area. Both Re-New kits use the same proven restoration system—the only difference is the coverage area.

Re-New is designed for exterior concrete surfaces that have become worn, faded, stained, or weathered over time but remain structurally sound. It restores the appearance of existing concrete without the expense and disruption of demolition and replacement.

Recommended Applications

  • Driveways
  • Sidewalks
  • Patios
  • Pool Decks
  • Walkways
  • Entryways
  • Courtyards
  • Exterior Residential Concrete
  • Commercial Concrete Surfaces

Ideal When

  • Concrete has faded from years of sun exposure.
  • The surface has a worn or uneven appearance.
  • You want to restore the look of concrete while maintaining its natural texture.
  • Replacing the concrete is unnecessary or cost prohibitive.
  • You want a professional-quality finish without the complexity of overlays or decorative coatings.

Re-New is designed to be applied in two coats for optimum durability, appearance, and long-term performance. Both kits contain the same professional-grade resurfacing system—the only difference is the total coverage area.

Coverage Options

RN-400 Kit

  • Covers up to 400 sq ft
  • Ideal for smaller driveways, patios, sidewalks, and pool deck areas

RN-800 Kit

  • Covers up to 800 sq ft
  • Designed for larger residential and commercial restoration projects

Coverage Notes

  • Coverage is based on two complete coats.
  • Actual coverage may vary depending on surface texture and porosity.
  • Rough or highly porous concrete may require additional material.
  • Use the TopKote Project Builder to estimate material quantities based on your specific project.

Re-New is designed for a simple spray-and-back-roll application using common painting tools. Proper surface preparation and two complete coats are essential for achieving the best appearance and long-term performance.

Basic Application Process

  • Prepare the Surface
    Thoroughly clean the concrete and remove dirt, stains, contaminants, and loose material. Allow the surface to dry before application.
  • Mix the Product
    Follow the included mixing instructions to combine the components before application.
  • Apply the First Coat
    Spray an even coat using a pump sprayer, then immediately back-roll with a ¼-inch nap roller for a consistent finish.
  • Apply the Second Coat
    After the first coat has dried, apply the second coat using the same spray-and-back-roll method.
  • Allow to Cure
    Let the surface cure according to the product instructions before returning it to service.

Application Tips

  • Apply when surface and air temperatures are between 65°F and 95°F.
  • Do not apply if rain is expected within 24 hours.
  • Always apply two complete coats for best results.
  • Work in manageable sections to maintain a uniform appearance.

TopKote products are carefully packaged and shipped from our Florida facility to help ensure they arrive ready for your project

Shipping

  • Orders are typically processed within 1–2 business days.
  • Shipping options and delivery estimates are calculated during checkout.
  • Tracking information is provided once your order ships.
  • Inspect all shipments upon arrival and notify us promptly if your order arrives damaged.

Returns

  • Unused, unopened products may be returned in accordance with our Return Policy.
  • Products that have been opened, mixed, or applied are not eligible for return.
  • If your order arrives damaged or incorrect, please contact TopKote Customer Support so we can make it right.

For complete shipping information, return requirements, and refund details, please visit our Shipping and Refund Policy pages.

RE-MOVE CLEANERS & SURFACE PREP

The first step to every successful concrete restoration project starts with proper surface preparation.

RE-MOVE products are formulated to remove stains, contaminants, and buildup from concrete, pavers, masonry, brick, and natural stone. Choose the cleaner that matches your surface condition before restoring, sealing, or protecting.

Cleans & Prepares Concrete, Pavers & Masonry for Restoration & Protection

RE-Move Concrete Prep is a professional surface preparation cleaner formulated to remove dirt, grease, tire marks, and surface contaminants from concrete, pavers, masonry, brick, and natural stone.

Available Sizes

1 quart 1 Gallon 5 Gallon

Removes Rust & Irrigation Stains from Concrete, Pavers & Masonry

RE-Move Rust Remover is formulated to dissolve stubborn rust and irrigation stains from concrete, pavers, masonry, brick, and natural stone.

Available Sizes

1 quart 1 Gallon 5 Gallon

Removes Oil, Grease & Petroleum Stains from Concrete, Pavers & Masonry

RE-Move Oil & Grease Remover is a professional-grade concentrate formulated to remove stubborn oil, grease, and petroleum-based stains from concrete, pavers, masonry, brick, and natural stone.

Available Sizes

1 quart 1 Gallon 5 Gallon

Removes Red Clay, Soil & Dirt Stains from Concrete, Pavers & Masonry

Use a clear and attention-grabbing short paragraph to engage your audience and entice them to take action.

Available Sizes

1 quart 1 Gallon 5 Gallon

Removes White Mineral, Hard Water & Calcium Deposits from Concrete, Pavers & Masonry

RE-Move Mineral Deposit Remover is formulated to remove white mineral deposits (efflorescence), hard water stains, and calcium buildup from concrete, pavers, masonry, brick, and natural stone.

Available Sizes

1 quart 1 Gallon 5 Gallon

RE-MOVE Rust Remover is formulated to dissolve and remove rust stains, irrigation stains, and other iron-based discoloration from concrete, pavers, masonry, brick, and natural stone. Its fast-acting formula penetrates deep into the stain to help restore the surface without aggressive grinding or harsh mechanical cleaning.

As part of the RE-MOVE Surface Preparation System, Rust Remover prepares concrete and masonry for restoration, sealing, waterproofing, or long-term protection by helping create a cleaner, more uniform surface before applying TopKote products.

The RE-MOVE Surface Preparation System is designed for projects where proper cleaning is essential before restoration or protection.

Recommended Applications

  • Concrete driveways and sidewalks
  • Concrete pavers
  • Patios and pool decks
  • Masonry and brick
  • Natural stone surfaces*

Ideal for removing

  • Dirt and general contamination
  • Rust and irrigation stains
  • Oil & grease stains
  • Red clay discoloration
  • Mineral deposits and efflorescence

Use Before

  • Re-New Concrete Resurfacing
  • Tru-Look Natural Sealer
  • Tru-Look Integrity Fortifier
  • Tru-Look Integrity Primer
  • Tru-Look Waterproofer

Always choose the RE-MOVE product that matches your specific stain or surface condition and test in an inconspicuous area before full application.

Each RE-MOVE product is formulated to target a specific type of stain or surface contaminant. Coverage will vary depending on the product selected, the severity of the staining, surface texture, and application method.
For best results, always choose the RE-MOVE product designed for your specific surface condition and follow the application instructions provided on the individual product page.

General Use Guidelines

  • Apply only to the areas requiring treatment.
  • Allow the product to work according to the product instructions before rinsing or additional cleaning.
  • Heavily stained or porous surfaces may require multiple applications.
  • Always test on a small, inconspicuous area before full application.
  • Follow with the appropriate TopKote restoration or protection system after the surface has been properly cleaned and prepared.

RE-MOVE products are designed for simple application using common cleaning equipment. While application methods vary by product, every RE-MOVE surface treatment follows the same basic preparation process to help achieve the best possible results..

Basic Application Process

  • Choose the Correct Product
    Select the RE-MOVE cleaner designed for your specific stain, contaminant, or surface condition.
  • Apply the Product
    Apply the cleaner according to the product instructions, ensuring complete coverage of the affected area.
  • Allow the Product to Work
    Give the cleaner time to penetrate and break down stains or contaminants before rinsing or additional cleaning.
  • Rinse and Inspect
    Thoroughly rinse the treated surface and inspect the results. Repeat the application if necessary for stubborn or heavily embedded stains.
  • Continue Your Project
    Once the surface is clean and properly prepared, proceed with Re-New Concrete Resurfacing or the Tru-Look Integrity System for long-lasting restoration and protection.

Application Tips

  • Always read the instructions for the specific RE-MOVE product being used.
  • Test on a small, inconspicuous area before full application.
  • Wear appropriate personal protective equipment.
  • Do not allow products to dry on the surface unless directed by the product instructions
  • Follow all label directions for safe handling and disposal.

TopKote products are carefully packaged and shipped from our Florida facility to help ensure they arrive ready for your project

Shipping

  • Orders are typically processed within 1–2 business days.
  • Shipping options and delivery estimates are calculated during checkout.
  • Tracking information is provided once your order ships.
  • Inspect all shipments upon arrival and notify us promptly if your order arrives damaged.

Returns

  • Unused, unopened products may be returned in accordance with our Return Policy.
  • Products that have been opened, mixed, or applied are not eligible for return.
  • If your order arrives damaged or incorrect, please contact TopKote Customer Support so we can make it right.

For complete shipping information, return requirements, and refund details, please visit our Shipping and Refund Policy pages.

TRU-LOOK INTEGRITY SYSTEM

Advanced penetrating protection for concrete, masonry, pavers, brick, and natural stone.

Tru-Look products are engineered to strengthen, seal, prime, and waterproof concrete and masonry from within while maintaining the natural appearance and breathability of the surface. Choose the product that matches your project goal, then select the package size that’s right for your project.

Invisible penetrating protection that helps reduce water intrusion while preserving the natural appearance of concrete, pavers, masonry, brick, and natural stone.

Tru-Look Natural Sealer’s penetrating formula protects from within while allowing moisture vapor to escape naturally.

Available Sizes

1 Gallon 5 Gallon 55 gallon

Strengthens concrete and masonry from within while helping reduce water intrusion and long-term deterioration.

Tru-Look Integrity Fortifier penetrates deep below the surface to strengthen, protect, and preserve concrete and masonry without changing its natural appearance.

Available Sizes

1 quart 1 Gallon 5 Gallon

Prepares concrete and masonry for compatible coatings while strengthening the substrate beneath the surface.

Tru-Look Integrity Primer creates an ideal foundation for paints and coatings by improving surface integrity while providing penetrating protection from within.

Available Sizes

1 quart 1 Gallon 5 Gallon

Creates a penetrating moisture barrier while maintaining the natural appearance and breathability of the surface.

Tru-Look Waterproofer helps reduce water intrusion in demanding environments while allowing trapped moisture vapor to escape naturally.

Available Sizes

1 quart 1 Gallon 5 Gallon

The Tru-Look Integrity System is a family of advanced penetrating concrete protection products designed to strengthen, seal, prime, and waterproof concrete and masonry from within. Unlike surface coatings that form a film, Tru-Look penetrates below the surface to help reduce water intrusion while maintaining the natural appearance and breathability of the substrate.

Choose the Tru-Look product that best matches your project goal, then select the appropriate size for your project. Every Tru-Look product is built on the same proven penetrating technology, with each formulation optimized for a specific application.

The Tru-Look Integrity System is ideal for protecting concrete and masonry surfaces while preserving their natural appearance.

Recommended Applications

  • Concrete driveways and sidewalks
  • Concrete pavers
  • Patios and pool decks
  • Masonry and brick
  • Natural stone surfaces
  • Vertical concrete and stone surfaces

Choose the Right Product

  • Natural Sealer – Everyday penetrating protection
  • Integrity Fortifier – Strengthening and long-term preservation
  • Integrity Primer – Surface preparation before compatible coatings
  • Waterproofer – Maximum moisture protection

All Tru-Look products are designed to penetrate below the surface to provide long-lasting protection without peeling, flaking, or creating a surface film. Coverage varies depending on the product selected, surface texture, porosity, and application method.

General Use Guidelines

  • Select the Tru-Look product that matches your project goal.
  • Follow the application instructions for the specific product selected.
  • Coverage may vary depending on concrete porosity and surface condition.
  • Proper surface preparation is recommended before application.
  • For best performance, clean the surface using the appropriate RE-MOVE cleaner before applying Tru-Look products.

Tru-Look products are designed for easy application using common professional or homeowner equipment. While application methods vary slightly between products, the basic process remains the same.

Basic Application Process

  • Prepare the Surface
    Remove dirt, stains, and contaminants using the appropriate RE-MOVE surface preparation product.
  • Select the Right Product
    Choose Natural Sealer, Integrity Fortifier, Integrity Primer, or Waterproofer based on your project requirements.
  • Apply Evenly
    Apply using the recommended application method for the selected product, following all label directions.
  • Allow Proper Cure Time
    Allow the product to penetrate and cure according to the product instructions before exposing the surface to traffic or moisture.
  • Enjoy Long-Lasting Protection
    Tru-Look’s penetrating technology helps protect concrete and masonry from within while maintaining the surface’s natural appearance and breathability.

Application Tips

  • Always begin with a clean, dry surface free of dirt, oil, grease, rust, efflorescence, and other contaminants.
  • Use the appropriate RE-MOVE surface preparation product when needed for the best results.
  • Apply only when surface and air temperatures are within the recommended range listed on the product label.
  • Do not apply if rain, heavy dew, or freezing temperatures are expected before the product has adequately cured.
  • Follow the recommended application method and coverage rate for the specific Tru-Look product being used.
  • Test on a small, inconspicuous area before full application, especially on decorative or natural stone surfaces.
  • Protect adjacent surfaces from overspray and clean equipment immediately after use.
  • Always read and follow the product label and Technical Data Sheet before application.

TopKote products are carefully packaged and shipped from our Florida facility to help ensure they arrive ready for your project

Shipping

  • Orders are typically processed within 1–2 business days.
  • Shipping options and delivery estimates are calculated during checkout.
  • Tracking information is provided once your order ships.
  • Inspect all shipments upon arrival and notify us promptly if your order arrives damaged.

Returns

  • Unused, unopened products may be returned in accordance with our Return Policy.
  • Products that have been opened, mixed, or applied are not eligible for return.
  • If your order arrives damaged or incorrect, please contact TopKote Customer Support so we can make it right.

For complete shipping information, return requirements, and refund details, please visit our Shipping and Refund Policy pages.

Still not sure?

Use the Project Builder for guided DIY recommendations, or visit the product-family pages for more education before purchasing.

Start Project Builder View Product Families